BEF04 Solid Carbon Steel and ABS Plastic Materials Five Function Hospital Medical Electric Nursing Bed
Features:
Size: length: 2100mm, width: 1000mm, height: 430mm-680mm.
Function introduction: it can be adjusted arbitrarily, with back tilt angle: 0~75°, leg tilt angle: 0~40°, overall lifting height 430mm--680mm.
The bed body is made of 60×30×1.2mm high-quality cold-rolled carbon steel tubes and is welded together.
The bed panel is stamped with 1.2mm high-quality cold-rolled carbon steel plate in one step, which improves the strength of the bed panel as well as force balance and gives it strong pressure resistance and anti-slip function with ventilation holes .
The welded steel pipe below is reinforced, which is solid and durable.
The bed body has a load capacity of 1700N; the back bed surface is designed as a double support structure, which is stamped and formed by cold steel plates to enhance the load-bearing capacity of the back plate. The rocker bears little pressure and saves effort when shaking.
Configuration: three sets of motors; four pieces of split lifting ABS guardrails that are installed on the bed panel and can move simultaneously with the functions of the bed; the headboard and foot board made of ABS reinforced plastic material; 5-inch high-end double-table casters with built-in fully enclosed self-lubricating bearings.
There are four infusion rack holes on both sides of the bed, equipped with a stainless steel infusion rod and 2 drainage hooks on the inside of the bed leg.
Audited Supplier 
){kind=link}