XAF100 Hospital Ridiology Processing Machine Diagnosis Full Automatic Clear Image Digital Film X-Ray Processor
Feature:
* Fully automatic travel:
Intelligent computer control system, digital tube shows working status, standard and non-standard washing process can be selected, the temperature of each medicine tank can be adjusted independently, the temperature control accuracy is ≤±0.3ºC, the washing speed can be adjusted and controlled freely, and there is over temperature Alarm and automatic power off function.
* Novel drying method:
It adopts high-efficiency centrifugal fan and drying air duct hot air system, and a unique high- performance suction roller is installed in the oven to ensure sufficient drying of the film.
* Convenient maintenance:
In the design, the requirement of convenient maintenance is fully considered, and the support from developing to drying can be easily taken out. The electrical control part is enclosed under the display screen. As long as the outer cover is opened, the electrical parts can be easily maintained.
* Energy saving and automatic shutdown system:
Discontinuous film advancement automatically cuts off the energy-saving setting of the main electric board; after the film is washed, the heater delays 2 minutes to stop heating, the fan delays 4 minutes to turn off, and the motor automatically stops rotating, the machine enters an energy-saving state, and the drying system adopts advanced The heat source body has high thermal efficiency and low energy consumption.
* Water washing automatic control system:
The machine will automatically enter water when it is working, and will not enter water when it is stopped, effectively saving water.
* Anti-oxidation and anti-crystallization system:
The machine automatically cleans the liquid shaft in the standby and standby state to prevent crystallization.
* Failure self-check and alarm system:
If the machine fails, it can automatically display and alarm.
Technical Data |
|
Types of Processed Film |
Water processor films |
Processing Film Specifications |
3''×4''--14''×17'' |
Maximum Washing Width |
14 inches (14"×17"), unlimited length |
Tank Volume |
Developing 6L, fixing 6L, washing 6L |
Flushing Speed |
80s~450sadjustable |
Development Time |
20~90s adjustable |
Developing Temperature |
20 ºC~40 ºCadjustable |
Fixing Temperature |
20 ºC~40 ºCadjustable |
Drying Temperature |
40 ºC~80 ºCadjustable |
Film processing Capacity |
100 PCS(14''×17''), 160 PCS (10''×12'')in theory |
Rehydration Mode |
Automatic rehydration/ manual rehydration Replenishment amount of liquid medicine: 20-400ml freely set |
|
|
Washing Control |
Using tap water,solenoid valve automatic control, punching sheet automatic water 2-8L/min,standby water consumption is zero |
|
|
Environmental Humidity |
Relative humidity ≤60% |
Environment Temperature |
5ºC-33ºC |
Power Supply |
AC220V 50HZ/13A single phase Power: 2.5KW |
Volume |
880×560×1100mm (length×width×height) |
Washing Sequence |
Developing-fixing-washing-drying |
Driving Motion |
Motor with excellent performance |
Drying Part |
With winter and summer switch,save energy |
Entry Mode |
Micro motion sensor |
Our Factory
Certificates
Our Team