IRW9010 Hospital Pediatrics High Quality Mobile Phototheray Lamp Medical New Born Baby Infant Radiant Warmer
Brief Introduction:
* Three control Modes: Pre-warm Mode, Manual Mode and Baby Mode control by micro-computer;
* Set Temperature and Baby Temperature can be displayed separately;
* Horizontal angle of warmer module and inclination of the bassinet can be adjusted;
* The panels surrounded bassinet can be turned outward or disassembled;
* X-ray cassette under the bassinet;
* APGAR timer;
* Multiple failure alarm indications;
* RS232 connector for data output;
* Disposable skin temperature sensor and SpO are optional.
Standard Configuration:
* Main body (including the warmer module, bassinet, main column,mobile stand and temperature controller), I.V. Pole and tray.
Environmental Requirement:
* Operating range: 18C- -30°C
Product Packaging:
* Package: The whole unit is packed into one carton
* Dimension: 1220mm X 670mm x 1100mm
* Gross Weight: 100kg
| Model: |
IRW9010 |
| Power requirement: |
AC220V-230V/50Hz or AC110-120V/50-60Hz, 600VA |
| Control Mode: |
Pre-warm Mode, Manual Mode and Baby Mode are controlled by micro-computer |
| Baby Mode temperature control range: |
34.5-37.5°C |
| Temperature sensor display range: |
5°C-65°C |
| Accuracy of skin temperature sensor: |
±0.2°C |
| Temperature uniformity of mattress: |
≤2°C |
| Angle of heater head: |
0° -90° any angel for two ways |
| Inclination of the bassinet: |
three tilt position |
| APGAR timer: |
audible and visible alarm when the device runs to50"~1' ,4' 50"~5' ,9' 50"~10' |
| Failure alarm: |
over temperature alarm, deviation alarm, sensor failure alarm, power failure alarm, setting alarm,checking alarm and so on. |
Our Factory
Certificates
Our Team
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}