IIB100YP Temperature Control Mode Split Screen Display Low Noise Data Storage Data Storage Function Infant Incubator
Feature:
* lTemperature control mode
* lSplit screen display
* lLow noise
* lData storage data storage function
* lHumidify the air duct
* lWith RS-232 interface, support data transmission
* lWith self - check function, a variety of fault alarm tips
* lIndependent overtemperature protection system
| Specification |
|
| Power requirement: |
AC220V-230V/50Hz |
| |
or AC110-120V/50-60Hz, 850VA |
| Control Mode: |
Air mode control by micro-computer |
| Air temperature control range: |
25ºC-37ºC |
| |
(override mode:37ºC-39ºC is optional) |
| The temperature fluctuation range between incubator temperature and average incubator temperature(under stable temperature condition): |
≤0.5ºC |
| Temperature uniformity: |
≤0.8ºC |
| Noise inside hood: |
≤45dB(A) |
| Failure alarm: |
over temperature alarm, deviation alarm, sensor failure alarm, fan motor alarm, power failure alarm, system alarm and so on. |
| Standard Configuration |
Hood, Base, Controller, l.V pole, Shelf. |
| Optional Configuration |
">37ºC" override mode is optional, Baby mode, Disposable skin temperature sensor, SpO, Neonate Bilirubin Phototherapy Equipment with Blue LED (Fixed model) |
| Environmental temperature |
|
| Operating range: |
20ºC~30ºC (Set temperature should be 3ºC higher than the environment temperature) |
| Ambient air velocity: |
<0.3 m/s |
| Product Packaging |
|
| Packing: |
The whole unit is packed into one carton |
| Dimension: |
1085mm x 640mm x 1075mm |
| Gross Weight: |
72Kg |
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}